Skip to content

How to Fix a Recliner That Is Hard To Close

  • Health

Recliners are among the most valuable pieces of furniture due to the amount of relaxation and comfort they provide. One of the most typical complaints about recliners is that you keep attempting to push it back but it doesn’t close. Many recliner owners become annoyed by this issue and end up purchasing a new recliner. However, this is a simple problem to remedy, and this blog will teach you how to fix a chair that won’t close.

If you are interested in watching video to fix a recliner instead of reading all the article

How to Repair a Recliner That Won’t Close: Step by Step

A reclining chair has two fastening mechanisms. The first is for simple and small issues. If the first method does not work, try the second. Needless to say, a set of tools is required to repair your chair, regardless of whatever mechanism is broken. Gather the following items before beginning your repair work:

  • Wrenches of various sizes
  • Screwdriver
  • Soiled rags
  • Lubricating fluid
  • File

The tools listed above are sufficient for fixing a reclining chair at home. However, if your chair has major problems, you may need to consult with a professional. With that said, let’s go over the repair options one by one:

1. Recliner Repair Fundamentals

You must be aware of the many issues that your recliner may be experiencing. Now we’ll walk through a step-by-step technique that fixes nearly every problem with ordinary recliner chairs. This fundamental approach of how to fix a recliner that is hard to close can address a wide range of issues, including ordinary wear and tear and a lack of upkeep.

  • Step 1. Gently turn the recliner to its side and check to see if the internal screws are secure. Tighten each of these screws to ensure that it is secure and not loose.
  • Step 2. Cover the chair’s upholstery with rags to keep it from getting dirty while you fix it. This is done to protect it against grease or lubricating oil.

2. Advanced Recliner Repair Method

  • Step 1. Turn your recliner to the side that does not have a handle this time.
  • Step 2. Using the handle, extend your footrest a bit further than normal. This motion will reveal a little spring hidden among the internal gear.
  • Step 3. An “L” rod would be held by the spring; look for a slight burr (if any) on the metal.
  • Step 4. When you find it, carefully remove it from your file. Continue smoothing the metal until it is even.
  • Step 5. The spring may now be snapped back into position, and you can pull the footrest of the recliner back.
  • Step 6. Finally, lubricant oil should be applied.

3. How to Repair Recliner Footrest Springs

Rusted or broken recliner footrest springs are fairly prevalent in vintage reclining chairs. Here’s how to fix a recliner that is hard to close by replacing this spring and get your chair to close normally again:

  • Step 1. Turn your recliner sideways or upside down to gain access to the internal reclining mechanism.
  • Step 2. The spring that connects the footrest to the recliner can be found here.
  • Step 3. Using a screwdriver, remove the screws that hold the spring to the recliner. Now, remove the old spring, but remember how you removed it since you’ll have to replace it the same way.
  • Step 4. Purchase a new spring and install it.

Our devices usually get out of order due to various reasons such as wear and tear, accidental damage, or technical faults. In many cases, we can repair them ourselves if we have the necessary knowledge and skills. Such as, I also fixed my recliner easily at home and once my glass got scratched, I repaired it by myself using the best eyeglass scratch remover. So what can you do? This comes to be a cost-effective option.

Now your recliner got fixed. Lying on it, you feel like to get some pleasure and comfort but don’t know How to connect Bose QuietComfort earbuds to PC?

Possible Causes of Your Recliner Not Closing

There could be a variety of causes for your chair not shutting, especially if it has been in use for a long time. Recliners that are prone to wear and strain might also fail. However, we must examine how to fix a recliner that is hard to close because this problem is very irritating.

Although after choosing the best power lift recliner with heat and massage a damaged recliner can occur which will be a consequence of the following situations, but there may be changes depending on the type of reclining mechanism placed in your chair. Rocker recliners (recliners that can also rock), outdoor recliners (meant for outdoor use), recliners for back discomfort, and other sorts of recliners are available on the market.

Let’s look at all the possible causes of your chair not closing:

  • Cable release failure
  • A mechanism for a loose latch
  • Internal screws are becoming loose.
  • Screws that are broken or worn-out
  • Sagging recliner springs
  • Inadequate lubrication
  • Faulty electrical wiring

Components That Have Burned

Internally, during these scenarios, some part of the system becomes too worn out to remain in position and firmly maintain the recliner. As a result, the chair will not close and will remain in the reclining position.

However, there could be a few other explanations to how to fix a recliner that is hard to close as for example, there could be far too much padding surrounding the footrest, preventing it from staying sealed in place when the recliner is in an upright position. In this instance, some cushioning and cloth must be removed to allow the chair to close.

Problem with Cable Release

Cable releases are one of the primary controlling components of your recliner chair’s reclining mechanism. It also helps the footrest stretch and retracts. However, if your footrest does not operate, do not assume that the fault is with the cable release. Even if the footrest does not retract, the cable release will still function. This shows that the issue could be caused by a faulty latch mechanism or a screw.

Recliners frequently suffer from broken cable releases or cracked arms. Rivets, like screws and bolts, can wear out and move out of their holes and connectors. This is known as latch loosening. It should be noted that if the recliner lacks a cable release mechanism

Some Additional Suggestions for Identifying the Issue

Check the weight capacity of the chair and make sure the weight you are placing on it is not greater than the capacity stated. Many users also cause extra stress and damage to the chairs.

Examine the area for any loose bolts or nuts that could be tightened. Recliners that have been in use for many years may no longer work as a result of this problem.

Examine the latch mechanism to see if any pieces are broken. If your chair still retains spring tension, it means that the receiver is still functional. Look beneath the recliner to determine if a bar has been placed into the receiver. If the

If the problem is due to a lack of lubrication, the mechanism of the chair may also be repaired by putting some oil on the joints. Let’s have a look at the problems.

Last Thoughts

Recliner chairs now have a special place in practically every home. These are intended to provide you with maximum comfort, relaxation, and recline. Catnapper recliners, recliners for big and tall people, stress less recliner seats, and other specialty recliner types have made our lives easier.

A broken recliner chair, on the other hand, might be a nightmare for most recliner owners because they don’t know how to fix a recliner. Repairing a reclining chair that won’t close isn’t difficult, and our repair guide will show you how.  This article should have taught you how to fix a recliner that is hard to close and how to repair it.

This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.

Leave a Reply

Your email address will not be published.